► Available sizes:
Height: 9.9cm x Width: 7.3cm / Dots: 11182
Digital Bordados | {{product_name}}
Here are 5 essential tips for perfect embroidery on a domestic or industrial embroidery machine.
1. Choose the right hoop.
The frame supports the fabric during embroidery, preventing it from stretching or forming wrinkles. Use:
- Lightweight fabric: heat-sealable or water-soluble stabilizer.
- Mesh or stretch fabric: cuttable stabilizer to prevent deformation.
- Thicker fabrics: tearable stabilizer may work well.
2. Correct adjustment of thread tension.
Inadequate tension can cause pulling or looping. To test:
- Do a test embroidery and see if the top and bottom thread are balanced.
- The bobbin thread should not appear at the top.
- Adjust the tension according to the type of thread and fabric.
3. Firm fixation of the fabric in the frame.
The fabric must be well stretched on the frame, but without excess tension so as not to deform. For a good fit:
- Tighten the hoop screw securely.
- Use temporary adhesive for extra fixation if necessary.
- Avoid pulling the fabric too much after securing it, as this may cause distortion.
4. Use suitable needle and thread.
- Thin fabrics: 75/11 needle and fine thread.
- Thick fabrics: 90/14 needle and more resistant thread.
- Mesh: ball point needle to avoid holes in the fabric.
- Always use good quality thread to avoid breaks and embroidery flaws.
5. Machine speed and testing before final embroidery.
- Reduce the speed for delicate embroidery or lighter fabrics.
- Always do a test on a scrap before embroidering on the final fabric.
- Make sure the embroidery design is well scanned and adjusted to avoid very dense stitches.
Following these tips, you will achieve more beautiful, seamless embroidery! 😊
